Leather Machinery Makes Artificial Leather To Meet More Leather Needs.

　　 1. direct coating method

The rubber is directly coated with a scraper on the pretreated base cloth, then is plasticized and plasticized into the plasticizing box, and then finished by the process of embossing, cooling and so on. This method can produce all kinds of ordinary artificial leather, artificial leather and foamed synthetic leather.

　　 2. transfer coating method

The paste is coated on the carrier with a reverse roller or scraper. After being coagulating, the cloth is then compounded on the gelatinized layer without tension, and then is plasticized, cooled and stripped from the carrier. After that, the finished product is obtained. This method is suitable for producing knitted fabric or non-woven fabric based foam artificial leather and ordinary artificial leather.

　　 3. calendaring paste

The resin, plasticizer and other compounding agents are mixed into the kneading machine according to the requirements of the formula, then evenly mixed into the kneading machine. After being mixed by the mixer or the open mill or extruder, the film is sent to the three roll or four roll calender to be rolled into the film with the required thickness and width, and is bonded with the pre heating base cloth, and then the product is finished by embossing and cooling.

　　 4. extrusion paste method

The resin, plasticizer and other coordination agents are mixed evenly in the kneading machine. After being refined, the extruder is extruded into a film with a certain thickness and width. Then, the three roller shaping machine is bonded to the preheated base cloth, and then the product is obtained after preheating, laminating, embossing and cooling. This method is used for the manufacture of thicker products, such as floor leather, conveyor belt, etc.